59 classes · free

Now screening · Quantum 2.0 · class 19 of 24

How to Program Cruise Mode

3:11

The video player is blocked until cookies are accepted.

Watch on Vimeo

‹ Previous class Next class ›

Video transcript

Download PDF

Cruise Mode is an important function normally found on Full Size Light Bars and Mini Bars, although you could still do that on stick lights, arrow boards, and inner bars. I'm gonna show you how that's done. Using the 49 inch light bar and the mini light bar as our example, I am gonna start with the 49 inch light bar in single color mode. Of course, like I said in previous videos, if it's a single color function, you have to program the color configuration first. In this case, I'm gonna program red on the driver's side. I'm gonna program blue on the passenger side. I'll then move on to the next step. I'll choose Input 1 cruise mode and my brightness level at 10%. I'll program my device. If I wish to have another Cruise Mode at a higher brightness, I can select that on another input Cruise Mode, brightness 100%, and program my device. I'll then activate live mode on Input 1 to see the results. Because the bar is facing me, you're looking at it from the rear side. Driver's side is red, passenger side is blue. To see it at 100% brightness, I'll select Input 3, And you can see the difference between a 10% Cruise Mode and a 100% Cruise Mode. I'll go back to Input 1. I'll repeat the step now using the minibar. Once the mini light bar is connected, you'll notice that it's programmed to a Quint level. I'll go ahead and move to my configuration state and select an input Cruise Signal brightness at 10%, and to activate a module based on the color sequence that I'm looking for. On the left side, I'll go with amber on the right side, I'll go with green. I'll program my device. I will then activate my mode and I can see green on the right side and amber on the left side. I can change my brightness settings by going to Input 2 Cruise Signal brightness at 100%, and also select a different color sequence, perhaps blue on the right side and red on the left side. I can even activate different colors on the front or on the rear program, my device, and activate live mode. The Quantum series is the only 5 color available product line in the industry that lets you program Cruise Mode in any color combination and any module location.