The video player is blocked until cookies are accepted.
Watch on VimeoVideo transcript
Download PDFSo when it comes to the 11 products of both the 3-mode and the Serial Series, your most popular products are gonna be your surface mounts. Let's talk about what those products come with. So again, when it comes to those surface mounts, they're offered in the thick housing and the thin housing for both the single mount, the thick housing, and thin housing for both the dual mount and the thin housing for the dual wide mount. Both the Serial Series and the 3-Mode series comes with a 1-ft cable harness exiting every module. The Serial Series has a 4 pin harness. While the 3 Mode series has a 6 pin harness, the single flat surface mount has the flange in the housing all connected in 1 while the thick housing has a flange that connects to the module. Both modules use a flat rubber gasket when securing it to the vehicle. The dual stack family offers the same options. The thin one has a base with 2 mounting holes at the end, connecting both modules together, while the thick one has a flange that connects both modules together, either option comes with the rubber gasket when securing gets to your vehicle. And last, the dual wide flat module comes with a rubber gasket when securing it to the vehicle. And of course, the base that pre-connects both modules together along with 2 mounting screw points. When it comes to mounting these 5 available modules on a surface of the vehicle, you'd use the provided rubber gaskets, but we also have seven brackets to pick from when mounting them in different locations of your car. The single L bracket, the double L bracket, your recess mount, window mount, hood mount, rotating bracket, and last your license plate bracket. And of course, every module comes with your mounting screws. That concludes what comes with the 5 surface mount light heads and the available bracket options.
Every course on the shelf
Quantum
Quantum 2.0
24 classes · 1 hr 4 min-
1:08
Intro
Introduction to Quantum 2.0
-
1:50
Unboxing
What Comes With the Pillar & Spoiler Mount
-
2:38
Unboxing
What Comes with the 44”, 49” & 60” Lightbars
-
1:42
Unboxing
What Comes With the 12”, 18” & 27” Mini Lightbars
-
3:01
Unboxing
What Comes With the 400, 600, 800 & Rocker Panels
-
2:10
Unboxing
What Comes With the Inner Lightbar
-
0:53
Unboxing
What Comes with the Split and Full Arrow Bar
-
2:50
Install & Wiring
How to Wire & Service Spoiler and Pillar
-
2:41
Install & Wiring
How to Wire & Service 44”, 49” & 60” Lightbars
-
3:35
Install & Wiring
How to Wire & Service 12”, 18” & 27” Mini Lightbar
-
1:52
Install & Wiring
How to Wire & Service Inner Lightbar
-
2:11
Install & Wiring
How to Wire & Service Split and Full Arrow Bar
-
2:54
Programming
How to Upgrade Color Levels
-
3:22
Programming
How to Configure the Color Settings
-
4:34
Programming
How to Program Different Functions
-
3:30
Programming
How to Use the Quantum Converter
-
2:35
Programming
How to Program Flash Mode
-
3:02
Programming
How to Program Directional Mode
-
3:11
Programming
How to Program Cruise Mode
-
3:22
Programming
How to Program Flood Mode
-
4:16
Programming
How to Program Stop-Turn-Tail Mode
-
2:04
Programming
How to Program Cut Off
-
1:37
Programming
How to Program Low Power
-
2:42
Programming
How to Program Pattern Changer
Quantum Software
11 classes-
Overview
The Difference With Dealer and End User Accounts
-
Programming
How to Upgrade to Dual, Tri or Quad
-
Overview
Single, Dual, Tri and Quad Configurator
-
Programming
How to Use Active-Input
-
Overview
What Are the Different Modes
-
Programming
How to Program Tail, Turn and Brake
-
Programming
How to Program Flashing Mode
-
Programming
How to Program Cruise Mode
-
Programming
How to Program Flood Mode
-
Programming
How to Program Arrow Mode
-
Programming
How to Program Cut Off
Q Series
Q Series
22 classes · 48 min-
2:32
Intro
Introduction to the Q Series Family
-
2:46
Install & Wiring
Comparing 3 Mode & Serial Wiring and Installation
-
1:26
Programming
How to Program Q Series Warning Flash Patterns
-
2:41
Programming
How to Program Q Series Pattern Phasing
-
1:09
Programming
How to Program Q Series Cruise Mode
-
2:56
Programming
How to Program Q Series STT Signal
-
1:28
Programming
How to Program Q Series Flood Mode
-
2:34
Programming
How to Program Q Series Colors
-
2:13
Programming
How to Program Q Series Color Lock
-
5:25
Programming
How to Program Q Serial Zones
-
2:35
Programming
How to Program Q Serial Inputs
-
1:35
Programming
How to Program Q Serial Flash Patterns
-
1:52
Programming
How to Program Q Serial Cruise Mode
-
4:07
Programming
How to Program Q Serial Stop-Tail-Turn Signal
-
1:33
Programming
How to Program Q Serial Flood Mode
-
1:24
Programming
How to Program Q Serial Low Power & Cut Off
-
3:04
Programming
How to Program Q Serial Directional Patterns
-
1:58
Unboxing
What Comes with the Q Series Surface Mounts
-
1:11
Unboxing
What Comes with Q Series 100 & 200 Sticks
-
0:54
Unboxing
What Comes with Q Series Mirror Mounts
-
1:55
Unboxing
What Comes with Q Series 1x & 2x Dash Lights
-
1:07
Unboxing
What Comes with Q Series Under Mirror Pucks
