Quantum Firmware Change Logs

09/25/26 - v7.1.0:

• Features

• Timer Inputs – Relay inputs set to a timer now turn off when the time runs out instead of staying on until triggered again; set the input to ON / OFF if it must stay on
• Park-Kill Horn – Steering-wheel horn now sounds the factory horn in park in every knob position; siren tones stay muted
•  

• Bug Fixes

• Long Button Timers – Button timers over 65 seconds now run for the full time set, up to 9,999 seconds
• Configuration Load – Relay no longer restarts over and over when it can't load its configuration; it stays connected so it can be reprogrammed with desktop app 1.1.37 or later
• Park-Kill Horn Press – Horn press in HF while parked no longer starts a siren tone when the vehicle leaves park
•  

• Siren Firmware 6.1.0

• Audio Playback – Voice messages and other recorded sounds no longer cut out several times a second
• Siren Update – Install from the desktop app with Program Siren; requires a siren with a siren port

07/08/26 - v6.9.0:

• Features

• Button LED – Controller button LED no longer stays lit after ignition shutdown
• Park-Kill Override – Amplifier now correctly shuts down during park conditions
• Analog Input States – Input systems report only activation changes, eliminating spurious events
• USB Connection – Improved reliability of device USB connection for configuration and updates

05/23/26 - v6.7.0:

• Features

• Controller: added configurable slide switch LED colors
• Day-night: update button LED brightness behavior for all modes

03/16/26 - v6.5.0:

• Features

• Addition of Whelen-like wail and yelp to the siren
• Add holdoff/debounce for multi-button output actions
• Ensure synq relay can recover from fatal system errors
• Update OOBE config to exercise wail 2 and yelp 2
• Add overload detection with debounce and cooldown protection
•  

• Bug Fixes

• Set manual input mode when playing/stopping channel 1 tones
• Update figure 8 and night ride to have gradients
• Analog mic mutes instead of stops siren tones
• Prevent audible blips for manual tones during analog mic keying